2018 AUDI Q5 quattro Premium

The auction record identifies the vehicle as having a salvage-title designation, with “FRONT END” listed as the primary damage. Stage 1’s photo review supports the FRONT END classification: the front bumper, grille, headlamp components, and front body panels show extensive visible damage or missing parts. However, Stage 1 also notes that the salvage-title status cannot be confirmed from photographs alone. The front end is severely damaged. The front bumper, grille, lower fascia, and lower air-intake components are missing or broken, exposing the front reinforcement, cooling assemblies, wiring, and mounting areas. Both front headlamp areas have open cavities with missing lens or assembly components. The near-side front hood is heavily creased and deformed, while the near-side front fender has pronounced crumpling, sharp creases, and displaced edges. The opposite-side front corner also has missing fascia, exposed internal components, broken mounting pieces, and deformation around the headlamp and wheel-arch area. The near-side wheel-arch trim and liner are absent or damaged, with fasteners and internal structure exposed. Damage is also present at the rear. The lower rear bumper cover is torn and missing across substantial sections, with irregular broken edges, exposed mounting areas, and hanging plastic components. Several detached exterior parts are shown separately from the vehicle, and these pieces have visible cracks or breaks. The instrument cluster displays a safety-system malfunction message along with illuminated check-engine, ABS, brake, airbag, and other warning indicators. The underlying causes and the condition of the related systems cannot be determined from the provided findings. The vehicle should not be considered roadworthy until the collision damage, wiring, restraint systems, braking system, warning indicators, and any hidden structural or mechanical damage have been professionally inspected and repaired. Several NHTSA safety recalls are listed for the 2018 Audi Q5. These include recalls involving brake-caliper performance (18V369000), the brake master cylinder (19V277000), seat-belt pretensioners (16V955000), wheel-arch trim (19V416000 and 19V737000), and possible liquid intrusion affecting the gateway control module (21V947000). Recall completion status is not provided and should be verified with an Audi dealer using the vehicle identification number. In particular, the brake-related recalls and the illuminated ABS and brake warnings require careful attention before any operation or purchase decision.