2022 AUDI Q5 E

The vehicle is listed with a salvage title certificate and an auction-designated primary damage classification of FRONT END. Stage 1 reports that the visible extensive front-end damage supports the stated FRONT END classification; however, the salvage-title status cannot be confirmed from exterior photographs. The front bumper cover, grille, and both front headlamp assemblies are missing, leaving wiring, radiator-area components, mounting points, and other internal front-end components exposed. The forward sections of both front fenders are also missing around the wheel openings, exposing the wheel-well and suspension areas. The metal front bumper reinforcement has a visible central crease and uneven deformation. Multiple lower-front ducts, covers, wheel-well liners, and trim pieces are broken or absent, with loose or exposed components at both front corners. Light linear scuffing is visible on the lower portions of the front and rear door panels on both sides of the vehicle. No additional damage findings were provided. The extent of the front-end damage means that the condition of concealed structural, cooling, electrical, lighting, driver-assistance, suspension, and restraint-system components cannot be determined from the available findings and should be verified through a complete physical inspection and diagnostic assessment. According to the NHTSA VIN decode, this is a 2022 Audi Q5 S line e quattro Prestige SUV with all-wheel drive, a 2.0-liter four-cylinder 55 TFSI plug-in hybrid system, automatic transmission, and a listed combined output of 362 horsepower. The vehicle was manufactured in Mexico.