Lot 60128296 · ON - COOKSTOWN
2018 AUDI Q3
VIN WA1JCCFS4JR003397
Price
Contact for pricing
Archive
The vehicle
- Year 2018
- Make / model AUDI Q3
- Trim level quattro Premium Plus, quattro Sport Premium Plus
- Body type Sport Utility Vehicle [SUV]/Multipurpose Vehicle [MPV]
- Condition PERMIT REBUILT - FIT
- VIN WA1JCCFS4JR003397
- Transmission Automatic
- Horsepower 200 к.с.
- Engine 2.0L I4 Turbo Gas
- Steering location Left-Hand Drive (LHD)
- Exterior color white
- Odometer 89,657 mi (144,289 km)
- Listing valid until 2026-08-13 17:00
Notes
Този Audi Q3 от 2018 г. е чудесен избор за всеки, който търси надежден и стилен SUV.
Умерени щети по лявата задна част на автомобила.
🚗 Audi Q3, 2018 г.
📋 Основни характеристики:
пробег: 144 289 км
двигател: 2.0 L, 4 цилиндъра, 200 к.с.
задвижване: предно
ℹ️ Допълнителна информация:
скоростна кутия: автоматична, 7 скорости
каросерия: джип
цвят: бял
Make an offer or ask a question
Log in to make an offer or ask a question about this car. Log in
Damage assessment
Body zones
AI-detected zones are pre-marked below — click a zone to adjust its severity.
Top
Underbody
Condition assessment
The auction record lists the vehicle as “PERMIT REBUILT – FIT” with “SIDE” as the primary damage classification. Stage 1 reports that the visible side-body damage supports the “SIDE” classification. However, the photographs do not confirm permit-rebuilt status, and the substantial visible side damage does not support an unqualified “FIT” condition.
The documented damage is concentrated on the visible side of this 2018 Audi Q3. The lower portion of the rear door has a deep, irregular dent with multiple creases and scraped paint. The rocker panel below the rear door is crushed or deformed, with extensive scraping and paint loss. The lower rear wheel-arch molding is missing, leaving mounting holes and exposed body edges. A visible gap and dark exposed area are also present where the lower rear bumper meets the rear wheel-arch area.
These findings indicate moderate collision damage affecting the rear door, rocker panel, wheel-arch trim, and adjacent bumper area. The rocker-panel deformation should be physically inspected for possible underlying structural or mounting damage. Door operation, wheel-arch and bumper attachment, the rear wheel and suspension area, and the underside should also be checked before purchase. Repairs are likely to require body straightening or panel replacement, refinishing, replacement of the missing molding, and correction of the panel gap.
VIN decoding identifies the vehicle as a 2018 Audi Q3 SUV/MPV manufactured by Audi AG in Spain. It is equipped with a 2.0-liter, four-cylinder gasoline engine and an automatic transmission. The decoded safety equipment includes front, side, and curtain airbags, ABS, electronic stability control, traction control, blind-spot monitoring, parking assist, and a rear visibility system.
One NHTSA safety recall is listed for this model year: campaign 19V385000, concerning the front turn-signal indicator on vehicles equipped with LED headlights. Audi’s remedy was a free body-control-module software update. Recall completion should be verified with an Audi dealer or through the vehicle’s service records.
Generated from auction photos by AI vision, then written up by an AI model. Findings are qualitative, not a certified inspection.