2020 AUDI Q3

The auction record lists this 2020 Audi Q3 as Salvage, with Rear shown as the primary damage. These are auction designations and should be treated as unverified claims. Stage 1 reports that the photos support visible rear damage through the detached and damaged rear bumper, but that the most extensive visible damage is concentrated along the left side; therefore, a rear-only primary-damage designation is not fully supported. The vehicle has severe collision damage along the left side. Both visible left-side doors have deep dents, sharp creases, scraped paint, and substantial deformation. The left rocker panel below the doors is severely crushed, with damaged lower trim. The left rear quarter panel and the surrounding wheel opening are extensively dented, creased, scraped, and buckled, and the wheel-arch trim is missing. The left rear wheel and tire appear visibly misaligned relative to the wheel opening and body, indicating that the wheel, suspension, or related body structure requires careful physical inspection. The rear bumper is severely detached, especially on the left side, with a large gap, displaced lower sections, exposed internal components, and broken or missing pieces at the left corner. The bumper cover also has multiple scuffs and scratches. Curtain airbag fabric is visibly deployed and hanging from the left roof and side headliner area. Airbag-system components, restraints, headliner components, body structure, wheel alignment, and suspension should all be professionally inspected and repaired before the vehicle is considered roadworthy. VIN decoding identifies the vehicle as a 2020 Audi Q3 Sport Utility Vehicle with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, automatic transmission, and the S line quattro Premium Plus trim. The vehicle was manufactured by Audi AG in Hungary. Two NHTSA recalls are listed for this model year. Recall 20V786000 concerns a brake pedal plate that may bend or detach during sudden stopping; the remedy is inspection and, if necessary, replacement of the brake pedal. Recall 20V644000 concerns the driver’s seat frame possibly being incorrectly bolted to the seat rail; the remedy is inspection and, if necessary, replacement of the seat structure. Recall completion for this specific vehicle should be verified by VIN with Audi or an authorized dealer.