2024 AUDI Q3

This 2024 Audi Q3 is listed with a “CERT OF TITLE SLVG REBUILDABLE” condition and a “FRONT END” primary-damage classification. The visible evidence supports the stated front-end damage code, while also showing substantial additional rear-end collision damage. The salvage/rebuildable title condition cannot be independently confirmed from the available photos. The front end has severe damage and missing components. The front bumper cover, grille, and lower fascia are absent, exposing the radiator area, wiring, front-end supports, and mounting structures. The right-front headlamp is missing, leaving its mounting cavity and wiring exposed. The hood is creased and deformed along the front edge and both front corner areas, with large uneven gaps. Visible cooling-stack fins are also irregular and locally bent. The left-front wheel-arch molding is missing, with mounting holes and unfinished inner edges exposed. The rear has extensive additional collision damage on both sides. The right- and left-rear quarter panels are severely deformed around the tail-lamp and bumper openings, with irregular panel edges and exposed internal components. Both rear bumper covers or assemblies are absent, exposing wiring, bumper structures, mounting components, and displaced lower trim. The lower liftgate has extensive denting, creasing, and deformation around the license-plate area and lower edge. Left-rear wheel-arch trim is also missing. Detached bumper sections, wheel-arch moldings, trim pieces, and lamp components are visible on the ground beside the vehicle. Factory data identifies this vehicle as a 2024 Audi Q3 Sport Utility Vehicle with the 45 TFSI turbocharged 2.0-liter four-cylinder gasoline engine, automatic transmission, and all-wheel drive. The decoded trim is S line quattro Premium Plus, and the vehicle was manufactured by Audi AG in Hungary. Two NHTSA safety recalls are listed for the 2024 Audi Q3. Recall 24V251000 concerns a possible loose electrical connection for the front passenger occupant-detection system, which may deactivate the front passenger airbag; the remedy is replacement of the occupant-detection system control module at no charge. Recall 25V082000 concerns a camera-control-unit software error that may prevent the rearview-camera image from displaying correctly; the remedy is a free software update. Recall completion should be verified by VIN with an Audi dealer before the vehicle is placed into service.