2024 AUDI Q3

The auction record lists the vehicle’s condition as “Clear” and identifies the primary damage as “Right Front.” However, Stage 1 reports that the visible evidence contradicts the stated clear condition because substantial collision damage is present. Stage 1 also reports that the photos do not support a right-front primary-damage location; the most extensive visible damage is concentrated at the left front corner and along the left side. The left front fender is severely crushed and heavily creased around the wheel arch, with exposed inner components and missing sections along the wheel-arch edge. Both the left front and left rear doors have large, irregular dents and creases extending into the adjacent side panel. The left rocker panel beneath the doors shows longitudinal deformation, scraping, and paint loss. Overall, the left front quarter and door-side body area display broad, severe deformation and scraped paint. At the front, the left bumper corner is severely cracked, scraped, and torn, with an irregular opening and separated lower edge. The left edge of the hood is raised and irregular, leaving a large uneven gap that exposes components below. Panels around the left headlamp and front corner are separated and deformed, with exposed mounting areas and broken edges. These findings indicate substantial collision damage affecting multiple exterior panels and potentially underlying mounting or structural components. A complete physical inspection is required to assess hidden damage, wheel and suspension condition, restraint-system operation, alignment, and the extent of necessary repairs. VIN decoding identifies this vehicle as a 2024 Audi Q3 S line quattro Premium SUV with all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine, and automatic transmission. The vehicle was manufactured by Audi AG in Hungary. Two NHTSA recalls are listed for the 2024 Audi Q3. Recall 24V251000 concerns a potentially loose electrical connection for the front passenger occupant-detection system, which may deactivate the passenger airbag; the stated remedy is replacement of the occupant-detection control module at no charge. Recall 25V082000 concerns a camera-control-unit software error that may prevent the rearview-camera image from displaying correctly; the stated remedy is a free software update. The completion status of these recalls for this vehicle should be verified with Audi using the VIN.