2025 AUDI Q3

Auction records list the vehicle’s condition as “Clear” and its primary damage as “Front End.” Stage 1’s photo-based assessment contradicts the “Clear” condition designation, stating that substantial front-end and driver-side collision damage is clearly visible. It supports the “Front End” primary-damage classification based on the severe hood, bumper, grille, and exposed cooling-stack damage, while also noting additional substantial driver-side damage. The 2025 Audi Q3 has severe damage across the front end. The front bumper assembly, grille, and surrounding fascia are missing, displaced, or broken, exposing the cooling components and internal front structure. Detached bumper and grille pieces are also present separately, with broken edges, separated sections, and scuffing. The visible radiator or condenser fins in the lower-center cooling stack are substantially bent and compressed, and surrounding supports are displaced. The hood has a large, deep deformation from the front edge toward the center, with multiple sharp creases and an uneven surface. The driver side has extensive additional damage. The rear door is severely deformed through the middle and lower sections, with a deep central crease, sharp folds, and scraped paint. The rear quarter panel and wheel-arch area are deeply crushed and creased, with missing wheel-arch trim and irregular panel edges. The front fender is moderately creased and deformed around the wheel arch, where the trim is absent. The lower front door has scrape marks and surface deformation, while the rocker panel and side-skirt area show scraping, creasing, and irregular deformation. The VIN decodes as a 2025 Audi Q3 S line quattro Premium SUV with all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine rated at 228 horsepower, and an automatic transmission. The vehicle was manufactured by Audi AG in Hungary. NHTSA recall campaign 25V082000 applies to certain 2024–2025 Audi Q3 vehicles. The recall concerns a camera control-unit software error that may prevent the rearview-camera image from displaying correctly at startup, increasing the risk of a crash. The stated remedy is a free dealer software update. Recall completion should be verified with an Audi dealer using the vehicle identification number. The reported damage is substantial and affects exterior body panels, the front structure, cooling components, and multiple mounting and trim areas. The condition of the frame, suspension, steering, airbag system, electrical components, engine, transmission, cooling-system integrity, and other concealed parts is not established by these findings and should be confirmed through a comprehensive physical inspection and diagnostic evaluation before purchase.