2020 AUDI Q3

This 2020 Audi Q3 is listed with a Salvage condition designation and an auction primary-damage code of “Front & Rear.” Visible collision damage is present at both ends of the vehicle, supporting the auction’s unverified “Front & Rear” damage classification. However, the provided photos do not independently establish the Salvage title status. The front end has severe damage. The front bumper cover is broken or missing in multiple areas, with exposed inner components and visible wiring. The grille and lower fascia contain broken, displaced, or detached sections, and a wire is hanging below the bumper. The front wheel-arch molding is missing, leaving mounting holes exposed. The front fender edge near the headlamp has a jagged break. The hood is deformed along the front edge and right-front area, with multiple linear scuff marks and a hole with missing material near the front-center section. The rear bumper has moderate damage, including scuffing, horizontal separation along the trim line, an uneven lower edge, and displaced or incomplete lower trim. A lower red reflector/trim section is displaced, and there is a small puncture or chip in the lower central area. Inside, the outer portion of the front driver’s-seat lower cushion has a small dark tear or puncture. The VIN decodes as a 2020 Audi Q3 quattro Premium SUV with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and an eight-speed automatic transmission. The vehicle is listed as having been manufactured by Audi AG in Hungary. Factory-listed equipment includes LED low-beam headlamps, forward collision warning, lane-departure warning, rear cross-traffic alert, rear visibility equipment, automatic emergency braking-related systems, and standard airbags and stability-control systems. The condition of these systems cannot be confirmed from the provided findings, and the exposed front-end wiring and collision damage warrant detailed inspection and testing. Two NHTSA recalls are recorded for this model and year. Recall 20V786000 concerns a brake-pedal plate that may bend or detach during sudden braking; the remedy is inspection of the weld and replacement of the brake pedal where necessary. Recall 20V644000 concerns an incorrectly bolted driver’s-seat frame on one 2020 Audi Q3 vehicle; the remedy is inspection of the seat-rail connection and replacement of the seat structure where necessary. The completion status of these recalls for this vehicle should be verified with Audi or an authorized dealer.