2022 AUDI Q3 S Line quattro Premium

The 2022 Audi Q3 is listed with a Salvage Certificate of Title, and the auction’s primary-damage code is FRONT END. The visible severe front-end damage supports the unverified FRONT END classification; however, the Salvage Certificate of Title status cannot be verified from photographs. The photographed front corner has extensive collision damage. The front fender is heavily crushed, torn, and open around the wheel and headlamp area, with components exposed behind it. The bumper cover at the same corner is severely cracked, torn, displaced, and missing sections. The headlamp assembly is broken and partially absent, with fragmented housing and exposed internal components. The hood edge at the affected front corner is bent and no longer matches the contour of the opposite side. Additional front-corner panels and lamp- and bumper-related sections are missing, leaving brackets, wiring, and other components exposed. The wheel-arch liner and adjacent splash-shield material are torn, broken, and displaced. The damage visible in the supplied images is concentrated at the front fender, bumper corner, headlamp area, and surrounding engine-bay perimeter. The photographs do not establish the condition of the underlying structure, suspension, steering, cooling system, wiring, safety systems, or drivetrain. A comprehensive physical inspection and diagnostic assessment are recommended before purchase and repair. VIN decoding identifies this vehicle as an Audi Q3 Sport Utility Vehicle with all-wheel drive, a gasoline 2.0-liter four-cylinder 45 TFSI engine, and an eight-speed automatic transmission. The vehicle was manufactured by Audi AG in Hungary. NHTSA records list five recalls applicable to the 2022 Audi Q3: recalls 21V825000 and 22V064000 concerning rearview-camera software updates, recall 22V673000 concerning possible fuel-tank vent-pipe damage, recall 22V701000 concerning rear-window glass, and recall 22V806000 concerning a possible infotainment-unit failure affecting the rearview-camera display. Recall completion should be confirmed by checking the VIN with Audi or an authorized dealer before the vehicle is returned to service.