2024 AUDI Q3 S Line quattro Premium

The auction record lists the vehicle as “CERT OF TITLE SLVG REBUILDABLE” with “FRONT END” as the primary damage. However, the Stage 1 photo assessment does not support a front-end primary-damage classification: the hood, grille, headlights, and front bumper appear substantially intact, while significant damage is visible along the left side and deployed restraint fabric is visible inside. The salvage/rebuildable title status cannot be confirmed from exterior photographs. The most significant visible damage is concentrated on the left side. The left front door outer panel has a large irregular dent, multiple deep creases, inward deformation, and surface scuffing. The rear edge of the left front fender, near the door seam and wheel arch, is also deformed, with an uneven panel contour. The left rocker-panel and lower-door trim is missing or damaged, leaving exposed mounting holes and an uneven lower edge. These areas will require detailed inspection to determine the full extent of structural, door-function, and mounting-point damage. The left front seat has a torn outer side bolster with white internal material exposed. Curtain-airbag fabric is hanging from the upper side roof/headliner areas, including above the front seating area, and the surrounding headliner edges are open or torn. The restraint system, airbag modules, headliner, seat, wiring, and related safety systems should be professionally inspected and repaired before the vehicle is operated. According to the VIN decode, this is a 2024 Audi Q3 S line quattro Premium, an all-wheel-drive SUV equipped with a 2.0-liter turbocharged gasoline four-cylinder engine rated at 228 horsepower and an automatic transmission. The vehicle was manufactured by Audi AG in Hungary. Two NHTSA recalls are listed for this vehicle model and year. Recall 24V251000 concerns a possible loose electrical connection in the front passenger-seat occupant detection system, which could deactivate the front passenger airbag; the stated remedy is replacement of the occupant detection system control module free of charge. Recall 25V082000 concerns a camera-control-unit software error that may prevent the rearview-camera image from displaying correctly; the stated remedy is a free software update. Recall completion should be verified with an Audi dealer using the vehicle identification number.