2020 AUDI Q3 quattro Premium

The vehicle is listed by the auction with a salvage vehicle title and “FRONT END” as the primary damage classification. Stage 1 reports that the visible front-end damage supports the auction’s FRONT END classification; however, the salvage-title status cannot be confirmed from photographs. The documented damage is concentrated at the front-left corner. A moderate section of the front bumper cover and lower corner trim is missing, leaving internal components visible. The bumper cover edge below the left headlamp is broken, with irregular edges and missing material. The bumper and adjacent fender area show deformation and creasing. Trim and cover material is also missing at the inner/lower edge of the left headlamp, creating a dark opening and uneven surrounding edges. The black molding around the front-left wheel arch is absent, with multiple mounting holes visible along the fender edge. A physical inspection is recommended to assess the condition of the headlamp mounting points, bumper reinforcement, front-end structure, cooling and lighting components, wheel-arch and fender alignment, wiring, sensors, and any damage not visible in the available findings. VIN decoding identifies this vehicle as a 2020 Audi Q3 quattro Premium SUV with all-wheel drive, a 2.0-liter four-cylinder gasoline engine rated at 228 horsepower, and an eight-speed automatic transmission. The vehicle was manufactured by Audi AG in Hungary. NHTSA records list two recalls for the 2020 Audi Q3. Recall 20V786000 concerns a brake pedal plate that may bend or detach during sudden braking; the stated remedy is inspection of the pedal weld and replacement of the brake pedal if necessary. Recall 20V644000 concerns a possible incorrect bolt connection between the driver’s seat frame and seat rail; the remedy involves inspection and, if necessary, replacement of the seat structure. Recall completion should be verified with Audi or an authorized dealer using the vehicle’s VIN.