2024 AUDI E-TRON GT quattro Premium Plus

The vehicle is listed with a salvage certificate of title, and the auction’s primary damage classification is “REAR END.” Stage 1 reports that the visible evidence supports this classification, citing damage to the right-rear quarter panel and bumper corner. The most significant visible findings are deployed driver airbag restraints. The steering-wheel airbag is expanded from the center of the steering wheel, and additional deployed airbag fabric protrudes from beneath the lower driver-side dashboard. These components, along with the related restraint-system and crash-sensor systems, will require professional inspection and replacement as necessary. At the front, the bumper center and lower lip show multiple light-colored horizontal scuff marks and paint transfer around the license-plate mounting area and along the lower edge. At the right rear, the quarter panel above and forward of the wheel has dents, sharp creasing, and scraped paint. The right-rear bumper corner has extensive abrasion and visible deformation, while the bumper and wheel-arch junction appears fractured and partially separated, with an irregular gap and damaged plastic. VIN decoding identifies this vehicle as a 2024 Audi e-tron GT quattro Premium Plus sedan, an all-wheel-drive battery-electric vehicle manufactured by Audi AG in Germany. The decoded vehicle information lists a combined system output of 469 hp and a single-speed transmission. NHTSA records show several recalls applicable to this model and model year. Recall 23V842000 concerns overheating of the 220V/240V compact charging cable or outlet under certain charging conditions. Recalls 24V228000 and 24V726000 concern potential high-voltage battery-module short circuits and an increased fire risk; recall 24V726000 expands and replaces earlier battery-related recalls, and its remedy involves diagnostic software, monitoring, and battery-module replacement where required. Recall 24V465000 concerns front-axle brake hoses that may tear and cause reduced braking performance. Recall 25V900000 concerns rearview-camera software that may prevent the camera image from displaying correctly. The completion status of these recalls is not provided and should be verified with Audi or an authorized dealer using the VIN. A complete physical inspection should include the vehicle structure, rear impact areas, bumper mounting points, airbag and seat-belt restraint systems, electrical and high-voltage battery systems, charging equipment, braking system, wheel alignment, and the operation of all safety and driver-assistance features.