2016 AUDI A6

The vehicle is listed by the auction as having a salvage certificate of title, with “FRONT END” recorded as the primary damage classification. The visible evidence supports the stated front-end damage code through extensive damage to the hood, front bumper, and front lighting. However, salvage-title status cannot be confirmed from the photographs. The hood has severe deformation, including deep creases, sharply folded sections, an uneven front edge, scraped paint, and exposed lighter substrate. The front bumper cover is severely damaged, with broken and missing sections at both lower corners, open cavities, and visible internal components. The lower bumper lip and trim are fractured and separated in several areas. The headlamp on the right side of the image has a cracked lens and broken surrounding edges. At the rear, the right quarter panel above and forward of the wheel opening has a pronounced inward dent with multiple creases and disturbed paint around the wheel arch. The rear bumper corner also has light-colored surface scuffing. According to the VIN decode, this is a 2016 Audi A6 sedan manufactured by Audi AG in Germany. It is equipped with all-wheel drive, a gasoline 3.0-liter six-cylinder engine, and an automatic transmission. Three NHTSA safety recalls are listed for this vehicle configuration. Recall 19V035000 concerns possible fuel-rail leaks that may increase fire risk; the stated remedy is replacement of the left and right fuel rails. Recall 18V862000 concerns an auxiliary-heater electrical connector that may overheat and increase fire risk; the remedy involves inspection and, where necessary, replacement of the auxiliary heater and connector. Recall 18V370000 concerns the passenger occupant-detection system, which may affect proper front passenger airbag deployment; the remedy is installation of a PODS repair kit. Recall completion should be verified with Audi using the VIN before purchase.