2016 AUDI A6

The vehicle is listed by the auction with a salvage title and “FRONT END” as the primary damage classification. The salvage-title status cannot be verified from the available photos. Stage 1 reports that the visible evidence supports the unverified front-end damage claim because the front bumper cover and grille are missing and front-end components are exposed. The front bumper cover is absent across the center and both front corners, exposing the bumper reinforcement and cooling components. The front grille assembly is also missing, leaving an open area between the headlights. Fascia and trim are missing from both the passenger-side and driver-side front corners, with internal components visible behind the headlights. The extent of damage to underlying structural, cooling, lighting, safety, and mechanical components cannot be determined from these findings alone and requires a detailed physical inspection. The VIN decode identifies this as a 2016 Audi A6 sedan manufactured by Audi AG in Germany, with all-wheel drive, an automatic transmission, and a gasoline six-cylinder engine listed at 3.0 liters. The decode also lists the engine model as “2.0T,” so the exact engine specification should be confirmed against the vehicle and factory records. NHTSA records list three applicable safety recalls: fuel-rail leakage risk under campaign 19V035000 (Audi reference 24DP), an auxiliary-heater electrical connector overheating risk under campaign 18V862000 (Volkswagen reference 82C1), and a passenger-occupant detection system issue that may affect front passenger airbag deployment under campaign 18V370000 (Volkswagen reference 74D5). Recall completion status is not provided and should be verified with Audi using the VIN before purchase.