2014 AUDI A6 quattro Prestige

The 2014 Audi A6 is listed with a rebuilt-salvage title and the auction’s primary damage designation is “FRONT END.” Visible front-end damage supports that primary-damage claim; however, the rebuilt-salvage title status cannot be confirmed from the photos. The most significant damage is to the front bumper. The bumper fascia is severely displaced and hanging away from the vehicle, particularly at the left front corner. Part of the left-side bumper area is missing, leaving inner front components and openings exposed. The lower grille area and the area below the left headlamp are also open, with components visible behind the displaced bumper. The condition of the headlamp, grille, underlying structural components, cooling system, sensors, and other mechanical parts is not established by these findings and requires a detailed physical inspection. Minor cosmetic damage includes light horizontal scuffing on the lower left rear bumper and several light scratches and scuff marks on the lower right rear bumper corner. The steering-wheel rim shows surface wear and gloss variation, while the driver’s seat outer bolster has creasing and visible leather wear. The instrument cluster displays illuminated check-engine and EPC warning indicators. These are important mechanical and engine-management concerns, but the photos do not establish their underlying cause. Diagnostic scanning and a complete mechanical inspection are recommended before purchase. VIN decoding identifies this vehicle as a four-door Audi A6 sedan with quattro all-wheel drive, a 2.995-liter six-cylinder gasoline engine, automatic transmission, and Prestige trim. The vehicle was manufactured by Audi AG in Germany. NHTSA records list several recalls for the 2014 Audi A6, including a front-passenger occupant-classification system recall and a fuel-line recall. Additional cooling-system recalls apply to certain A6 vehicles equipped with 2.0-liter Turbo FSI engines; the decoded vehicle is identified with a 2.995-liter engine, so applicability should be confirmed by VIN and service records. Recall completion should be verified with Audi before operation.