2021 AUDI A6 quattro Premium

This 2021 Audi A6 is listed with a Certificate of Salvage, and the auction’s primary-damage designation is “MECHANICAL.” The auction mechanical-damage code requires a physical inspection and cannot be confirmed from the available images. The salvage status is administrative and likewise cannot be confirmed or contradicted from exterior images. The visible damage is concentrated at the front of the vehicle and is extensive. The front bumper cover, grille, and both front headlamp assemblies are missing, leaving the front-end structure and mechanical components exposed across the width of the vehicle. Loose wiring, connectors, and hoses are visible. A detached front bumper assembly, including the grille and attached wiring, is shown separately on the ground; its side sections have irregular detached edges and broken-looking mounting areas. Black plastic trim at the right-front corner and wheel well is also hanging away from the vehicle, with additional wiring and connectors exposed. The findings establish significant front-end disassembly or collision-related damage, but they do not determine the condition of the underlying mechanical, electrical, cooling, restraint, or structural systems. A thorough physical inspection is required before purchase, including checks of the front structure, mounting points, wiring, sensors, cooling and air-conditioning systems, steering and suspension, airbags, and diagnostic faults. The missing lighting, grille, bumper, trim, and associated hardware will require replacement or repair. The supplied recall information identifies the following campaigns applicable to 2021 Audi A6 vehicles or listed A6 variants: 21V606000 for the middle-rear seat-belt automatic-locking retractor; 22V034000 for possible rear-axle alignment inspection issues; 21V159000 concerning the passenger air-bag score line; 21V295000 for rear-axle trailing-arm lock nuts; 22V155000 for an inaccurate fuel-level reading; 22V742000 and 25V900000 for rearview-camera display software; 22V861000 for protection against liquid affecting the gateway control module; 23V601000 for an incorrectly labeled brake-fluid reservoir cap; and 25V201000 for instrument-panel display software. Recall repairs should be verified by VIN with an Audi dealer, as completion status is not provided and some may be especially relevant to a salvage-repaired vehicle.