2018 AUDI A6 quattro Premium Plus

The auction record lists a salvage certificate of title and identifies SIDE as the primary damage classification. Stage 1 reports that visible denting and creasing on the left rear door and quarter panel support the stated SIDE classification; however, the salvage-title status cannot be confirmed from the photos. The documented exterior damage is concentrated on the left rear side. The left rear door outer panel has multiple moderate creases, an irregular depressed area near the rear edge, and adjacent paint scuffing. The left rear quarter panel, above and forward of the rear wheel, has pronounced creasing and localized deformation extending toward the wheel-arch area, with additional paint scuffing. Deformation is visible across the trailing portion of the rear door and the adjacent quarter panel, including an irregular depressed area near the rear wheel and tail-lamp area. The findings do not establish the condition of hidden structural components, suspension, wheel alignment, door operation, tail-lamp mounting, or other mechanical and safety systems. These areas should be inspected and tested before purchase. The VIN decodes as a 2018 Audi A6 sedan with all-wheel drive, a gasoline 2.0T four-cylinder engine, and an automatic transmission. The vehicle was manufactured by Audi AG in Germany and is identified as the quattro Premium Plus trim. Two NHTSA recalls are listed for this model and year. Recall 19V035000 concerns possible fuel-rail leaks that may increase the risk of fire; the stated remedy is replacement of the left and right fuel rails. Recall 18V370000 concerns the passenger occupant detection system, which may affect proper front-passenger airbag deployment; the stated remedy is installation of a PODS repair kit. Recall completion should be verified with Audi using the VIN.