2024 AUDI A6 quattro Premium Plus

The vehicle is a 2024 Audi A6 sedan with a salvage certificate and an auction-listed primary damage classification of FRONT END. The visible front-end damage supports the stated FRONT END primary-damage claim; however, a SALVAGE CERTIFICATE status cannot be confirmed from photographs. The front of the vehicle has severe collision damage. The hood is heavily creased and deformed, particularly along the front edge and left-front corner, with irregular gaps above the front fascia. The front bumper assembly is detached, with the lower section hanging down onto the floor. The center grille and surrounding structure are broken and incomplete, exposing components behind it. The front-left fascia, including the area around the headlamp and bumper corner, is cracked, broken, and partially missing. The lower bumper and grille sections are also displaced, with missing or separated plastic parts and exposed cooling components. The headlamp lens remains visible, but its surrounding bezel and fascia are moderately damaged and incomplete. Multiple airbags have deployed. Inflated airbag material is visible from the steering wheel, below the dashboard, and along both visible roof-side and side-window areas. The driver airbag is visibly deployed from the steering wheel, and the curtain airbags are hanging along the roof edges. The vehicle should be treated as requiring a complete restraint-system inspection and substantial collision repair. The photographs do not establish the condition of the engine, transmission, cooling system, suspension, steering, chassis structure, or electronic systems. According to the VIN decode, this is an all-wheel-drive Audi A6 quattro Premium Plus equipped with a turbocharged 2.0-liter four-cylinder gasoline engine rated at 261 hp and an automatic transmission. It was manufactured by Audi AG in Neckarsulm, Germany. The provided NHTSA recall information lists campaign 25V900000 for a rearview-camera software issue affecting certain 2019–2026 Audi vehicles. The potential consequence is that the rearview image may not display as intended. The stated remedy is a free dealer software update; recall completion should be verified by VIN with Audi or NHTSA.