2015 AUDI A6 3.0 TDI PREMIUM PLUS

The 2015 Audi A6 is listed with a Clear auction condition and Front End primary-damage code. Stage 1 reports that the visible evidence shows substantial front-end collision damage, supporting the Front End classification and being inconsistent with interpreting the Clear condition as an undamaged vehicle. The painted front bumper cover and center grille are missing, leaving the bumper reinforcement, front cooling stack, and other internal components exposed. Lower front trim and air ducting are missing or detached, with loose plastic components visible below the vehicle-right headlamp. The bumper and corner fascia are also absent below both headlamps, exposing brackets, ducting, wiring, and support areas. Electrical wiring and a black rectangular module are hanging in the lower center of the front end. The extent of the visible damage indicates that significant replacement and repair work will be required. The condition of concealed structural, cooling, electrical, safety-system, and mechanical components cannot be established from these findings and should be confirmed through a comprehensive physical inspection and diagnostic scan before purchase. The VIN decodes the vehicle as a German-built 2015 Audi A6 sedan with all-wheel drive, a 2.967-litre six-cylinder diesel engine rated at 240 hp, and an automatic transmission. NHTSA records list four recalls associated with the 2015 Audi A6: campaigns 18V229000 and 17V002000 concerning the electric coolant pump on vehicles equipped with 2.0-litre Turbo FSI engines; campaign 18V862000 concerning the auxiliary-heater electrical connector; and campaign 18V370000 concerning the front passenger occupant-detection system. Because this vehicle decodes with a 2.967-litre diesel engine, the engine-specific coolant-pump recalls may not apply. Recall completion and applicability should be verified with Audi using the VIN before the vehicle is operated.