2016 AUDI A5 S Line quattro Premium

The vehicle is listed by the auction with a salvage title and “FRONT END” as the primary damage classification. Visible front-end collision damage supports the unverified front-end damage claim; however, the salvage-title status cannot be confirmed from the available photos. Observed damage includes moderate creasing and deformation along the leading edge of the hood. The hood edge is irregular and raised, with an open gap exposing components beneath it. The center grille is severely damaged, with multiple fractured or missing slats and surrounding sections. A transverse metal component is visible through the grille opening. The front bumper fascia has moderate splits, irregular edges, and deformation, mainly around the right-side grille junction and lower intake area as viewed from the front. A section of the black insert in the lower-right bumper intake is missing, leaving internal components exposed. NHTSA VIN decoding identifies this vehicle as a 2016 Audi A5 Cabriolet with a 2.0-liter, four-cylinder gasoline engine, automatic transmission, and the S line quattro Premium trim. The vehicle was manufactured by Audi AG in Germany. Three NHTSA recalls are listed for this make, model, and year. Campaign 17V622000 concerns auxiliary-heater wiring that may overheat or melt because of connector corrosion, increasing fire risk. Campaigns 17V002000 and 18V229000 concern the electric coolant pump, which may overheat or short-circuit and also increase fire risk. Recall completion should be verified with Audi before purchase.