2018 AUDI A4

The auction record lists the vehicle as **Salvage** with **Rear** as the primary damage classification. The visible evidence supports the stated rear-damage classification, with extensive collision damage present. The Salvage title status cannot be confirmed from the available images. The rear bumper cover is missing, exposing the bumper reinforcement, inner body panels, wiring, and exhaust components. The metal bumper reinforcement is visibly bowed and deformed across the vehicle’s width. The trunk lid has pronounced crushing and deformation along the rear edge and right side, with irregular contours and distorted panel gaps. Both rear body corners show severe deformation and exposed inner metal around the tail-lamp and bumper openings. The outer tail-lamp assemblies are missing on both sides, leaving wiring and mounting areas exposed. Lower rear fascia and side-trim components are also absent from both rear corners, creating open cavities and exposing internal components. According to the VIN decode, this is a 2018 Audi A4 sedan manufactured by Audi AG in Germany. It has all-wheel drive, a 2.0-liter four-cylinder gasoline engine, and an automatic transmission. One NHTSA safety recall is listed for this vehicle model and year range: recall 21V874000, concerning the cable connecting the seat heater to the Passenger Occupant Detection System. A contact fault may cause the system to disable the front passenger airbag. The stated remedy is replacement of the connecting cable and either the heating mat or the seat cover, free of charge through an Audi dealer. Recall completion should be verified by VIN before purchase.