2023 AUDI A4

The auction record lists this 2023 Audi A4 as having a Certificate of Salvage and identifies the primary damage as FRONT END. Stage 1 reports that the visible front-end collision damage supports the auction’s FRONT END classification. However, the Certificate of Salvage status cannot be confirmed from exterior photographs. The vehicle has severe damage to the front bumper cover. Both front corners have broken or missing sections, exposed components, open mounting and lamp areas, and detached lower pieces; the right-side lower section is hanging downward. The left and right front fender edges are deformed near the headlamp and bumper junctions, with irregular panel gaps. The hood also has moderate deformation, including creasing and uneven contours along the front edge and left-center surface. The driver airbag has deployed from the steering wheel, and the left-side roof/A-pillar curtain airbag is also deployed. These restraint-system components, along with the related sensors and control systems, will require inspection and likely replacement as part of the repair assessment. The visible findings do not establish the condition of hidden structural, mechanical, electrical, cooling, lighting, or driver-assistance components. There is also minor scuffing, paint transfer, and surface abrasion on the left rear bumper corner. According to the VIN decode, this is a 2023 Audi A4 sedan in S line quattro Premium Plus specification, equipped with a 2.0-liter turbocharged four-cylinder gasoline engine, automatic transmission, and all-wheel drive. The vehicle was manufactured by Audi AG in Germany. The reported factory equipment includes standard front, side, curtain, and knee airbags, as well as electronic stability control, forward-collision warning, lane-departure warning, lane-keep assistance, and pedestrian automatic emergency braking. A complete physical inspection and diagnostic scan are recommended before purchase, with particular attention to the front structure, airbag and restraint systems, cooling system, lighting, wiring, suspension, alignment, and advanced safety systems.