2023 AUDI A4

The vehicle is listed by the auction as **Salvage**, with **Front End** identified as the primary damage. Stage 1 reports that the visible evidence supports the stated front-end damage claim and is consistent with the Salvage condition; severe front-end damage, extensive windshield cracking, and deployed airbags are visible. The front end has extensive collision damage. The front bumper cover, grille/fascia, and lower trim are missing, leaving the reinforcement, cooling components, ducting, hoses, wiring, brackets, and other internal structures exposed. The front reinforcement is visibly bent, bowed, and kinked. The lower cooling assembly has severely crushed and distorted fins. The hood is dented and deformed across the front-center area, with raised sections, deep depressions, scraped paint, and exposed darker material. There is a wide, uneven gap between the hood, front fender, and headlamp area. The visible front fender is sharply creased and pulled outward around the wheel opening and door edge; in one area, it is torn and folded outward with a detached section extending beside the wheel. The front rocker-panel trim is also separated and deformed. The windshield is severely damaged, with dense spiderweb cracking, multiple radiating fractures, and long cracks across a substantial portion of the glass. Multiple airbags are visibly deployed, including the passenger-side dashboard airbag, front side airbags, and roof-side curtain airbags. A rear passenger-side curtain airbag is also deployed, with a large interior trim panel detached and broken near the rear door opening. The instrument cluster displays: “Brake pads: wear limit reached. You can continue driving. Please contact Service.” This indicates that the brake pads have reached their wear limit and require service. Factory VIN data identifies this vehicle as a 2023 Audi A4 sedan with the S line quattro Premium Plus trim, all-wheel drive, a turbocharged 2.0-litre four-cylinder gasoline engine rated at 261 hp, and an automatic transmission. The vehicle was manufactured by Audi AG in Germany. A complete inspection is required to determine the condition of the underlying cooling, structural, electrical, restraint, suspension, steering, and drivetrain systems, as well as the full cost of repair.