2020 AUDI A4 quattro Premium Plus

The auction record identifies the vehicle as having a Certificate of Salvage and lists “REAR END” as the primary damage. Stage 1 reports that visible rear-end collision damage supports the unverified “REAR END” claim, while the certificate-of-salvage status cannot be confirmed from the photos. The 2020 Audi A4 has severe damage concentrated at the left rear corner. The left rear quarter panel is deeply creased, dented, and deformed around the outer tail-lamp opening, with additional crushed sections and sharp, irregular panel edges below and beside the lamp. The left outer rear tail-lamp assembly is missing, leaving the opening and mounting area exposed. The left corner of the rear bumper cover is torn, displaced, and broken, with exposed areas behind it. Lower rear bumper components are detached and hanging below the vehicle, and loose bumper material is visible on the floor. Electrical wiring and connectors are exposed and hanging in the damaged rear bumper and tail-lamp area. A visible instrument display indicates a malfunction and limited availability of the emergency call/eCall function. This system should be diagnosed during inspection. According to the VIN decode, this is a German-built 2020 Audi A4 sedan with all-wheel drive, a 2.0-liter four-cylinder gasoline engine, automatic transmission, and the quattro Premium Plus trim. Three NHTSA recalls are listed for this vehicle configuration. Recall 21V295000 concerns possible rear-axle trailing-arm lock-nut failure, which may misalign the rear axle and cause loss of control. Recall 22V034000 concerns rear-axle alignment inspection after repairs related to 21V295000, with possible premature or uneven tire wear. Recall 21V874000 concerns a passenger-seat heater/PODS cable fault that may disable the passenger airbag. Recall completion should be verified by VIN with Audi, and all rear structural, suspension, wiring, lighting, restraint-system, and eCall components should be professionally inspected before purchase.