2016 AUDI A3

The 2016 Audi A3 is listed with a salvage certificate and an auction primary-damage classification of “FRONT END.” The visible front bumper and lower front fascia damage supports the unverified “FRONT END” classification. However, the salvage-certificate status cannot be confirmed or contradicted from exterior photographs alone. The front bumper has extensive lower-section damage. Both lower grille or insert sections are missing or broken, with irregular plastic edges, open gaps, and internal components visible behind the bumper. The lower black trim, lip, or undertray is displaced and visibly hanging or separated from the bumper cover along the lower front edge. These findings are consistent with moderate collision damage to the front bumper assembly. The condition of components behind the bumper, including mounting points and other front-end systems, requires physical inspection. According to the VIN decode, this is a four-door Audi A3 sedan with a 2.0-liter, four-cylinder gasoline engine, automatic transmission, and all-wheel drive. The vehicle was manufactured by Audi AG in Hungary. NHTSA recall records identify the following campaigns associated with the 2016 Audi A3: recall 21V198000 for a possible passenger-occupant detection system malfunction that may deactivate the passenger airbag; recall 22V543000 concerning potential improper deployment of the front passenger airbag inflator module; and recall 24V110000 concerning a fuel-tank suction-jet-pump seal that may allow fuel to enter the EVAP system and potentially leak. The latter campaign is specified for front-wheel-drive A3 sedans, while this vehicle decodes as all-wheel drive, so applicability should be confirmed by VIN. Recall completion should be verified with Audi before purchase.