2018 AUDI A3

The auction listing identifies this 2018 Audi A3 as Salvage, with “Front End” recorded as the primary damage. Stage 1 reports that the visible front-end damage supports the Front End classification; however, the Salvage status cannot be confirmed from the photographs alone. The vehicle has severe damage to the front bumper cover, including large open gaps and missing or broken sections at both outer corners and in the lower bumper area. Internal components are visible through the openings. Both front headlamp assemblies are absent from the vehicle, and the detached assemblies are shown separately on the ground. Uneven gaps are also visible between the hood, grille, and bumper junction. The available findings document significant front-end collision damage, but they do not establish the condition of the underlying structural, mechanical, electrical, cooling, or safety systems. The VIN decodes as a 2018 Audi A3 sedan manufactured by Audi AG in Hungary. It is equipped with a 2.0-liter, four-cylinder gasoline engine and an automatic transmission. The decoded vehicle information lists front and side occupant protection systems, including curtain airbags, but the condition and functionality of these systems require physical inspection. Two NHTSA safety recalls are listed for this vehicle: recall 21V198000 concerning a possible malfunction of the front passenger occupant classification system, which may deactivate the passenger airbag, and recall 24V110000 concerning a fuel-tank suction jet pump seal that may allow fuel to enter the EVAP system and potentially leak from the charcoal canister. Recall completion should be verified with Audi or an authorized dealer before purchase. A comprehensive inspection and repair estimate are recommended, with particular attention to the front structure, headlamp wiring and mounting points, cooling and air-conditioning components, airbags and sensors, fuel and EVAP systems, and overall vehicle alignment.