2023 AUDI A3

The vehicle is a 2023 Audi A3 sedan with front-wheel drive, a 2.0-liter turbocharged four-cylinder gasoline engine, and an automatic transmission. The VIN decode identifies the Premium trim, with the vehicle manufactured by Audi AG in Germany. The auction record lists the title condition as “Clear” and the primary damage as “Front End.” Stage 1’s photo-based assessment states that the visible evidence contradicts the “Clear” condition and supports the Front End damage classification. The front bumper cover, grille, both headlamp assemblies, and multiple lower front-end trim, air-guide, and splash-panel components are missing from their installed positions. The removed parts are shown detached and placed on the ground, with broken or irregular mounting edges and separated plastic sections. With these components removed, the bumper reinforcement, radiator area, internal front-end components, mounting structures, wiring, and connectors are exposed. The bumper reinforcement has visible abrasion, white material transfer, and surface damage on the right side as viewed from the front. Several electrical wires and connectors are hanging loose around the bumper and headlamp areas. The available findings do not establish the condition of concealed structural, cooling, suspension, or mechanical components, so a detailed physical inspection will be required. The instrument cluster displays an “Audi pre sense: malfunction! Please contact Service” message, along with multiple illuminated warning indicators. The vehicle should not be considered road-ready until the front-end components, wiring, lighting systems, and related safety systems have been repaired and diagnosed. Two NHTSA recalls are listed for this model year. Recall 22V901000 concerns missing weight-capacity information on the B-pillar safety certification label; the stated remedy is installation of an overlay label by an Audi dealer. Recall 24V251000 concerns a possible loose electrical connection to the front passenger occupant-detection system, which could deactivate the passenger airbag; the stated remedy is replacement of the occupant-detection control module. Recall completion status is not provided and should be verified with Audi or an authorized dealer.