2016 AUDI A3

This 2016 Audi A3 is listed with a salvage/rebuildable certificate of title, and the auction’s primary-damage designation is FRONT END. Stage 1 reports that the visible severe front-end collision damage supports the stated FRONT END classification; however, the salvage/rebuildable title status cannot be confirmed from photographs. The vehicle has extensive damage across both front corners. The hood is severely creased, buckled, and displaced, while the front bumper cover and grille are missing. Both headlamp assemblies are absent from their mounting areas; one detached headlamp is shown with a cracked housing, damaged lens, and broken mounting edges. The front radiator support and crossmember are bowed and distorted, with damaged mounting points. The exposed radiator and condenser are crushed and bent, and multiple wiring harnesses and electrical connectors are exposed or loose in the front engine compartment. Detached bumper, grille, headlamp, and other broken plastic components are also visible. The driver steering-wheel airbag and the left-side curtain airbag are deployed. The windshield has multiple cracks and branching fracture lines near the upper central area. Additional damage includes a dent, crease, and scuffing on the left rear door. Factory VIN data identifies the vehicle as a 2016 Audi A3 sedan manufactured by Audi AG in Hungary. It is equipped with a 1.8-liter four-cylinder gasoline engine and an automatic transmission. The decoded data lists the Premium/Komfort (Canada) trim, but no drivetrain information was provided. NHTSA records list three recalls applicable to the 2016 Audi A3: recall 21V198000 for a possible passenger occupant-detection system malfunction that may deactivate the passenger airbag; recall 22V543000 concerning the front-passenger airbag inflator module; and recall 24V110000 involving a fuel-tank suction-jet-pump seal that may allow fuel to enter the EVAP system and potentially leak from the charcoal canister. The completion status of these recalls for this vehicle should be verified with Audi using the VIN. The observed damage indicates that substantial front-end structural, cooling-system, lighting, wiring, windshield, and airbag repairs will be required. A complete physical inspection should be performed before purchase, including evaluation of the underlying structure, cooling system, electrical systems, restraint systems, and mechanical condition.