2018 AUDI A3

This 2018 Audi A3 Cabriolet is recorded with a salvage condition and “Right Front” as the auction’s primary damage classification. Stage 1 reports that the visible evidence supports substantial front-right damage, including missing body panels, bumper damage, exposed wheel-well components, and a missing wheel. Stage 1 also states that the salvage status itself cannot be confirmed from exterior photographs alone. The front-right corner has extensive collision damage. The bumper cover is torn, cracked, displaced, and broken in several areas, with exposed sections behind it. The front-right fender and wheel-well liner are missing, leaving the suspension and other internal components exposed. No wheel or tire is installed at the front-right position, and the vehicle is supported by a wooden block. The hood is deformed and raised at its front-right edge, while the headlamp area has broken or displaced trim and an irregular opening. The front-right door has a severe deformation near its leading edge, with damaged material exposed. A large irregular opening with torn and missing material is present in the engine airbox cover on the right side of the engine compartment. The instrument cluster displays multiple warning indicators, including ABS, brake, airbag, traction-control, engine, EPC, steering, and tire-pressure warnings. The available findings do not establish the cause of these warnings. Additional cosmetic damage consists of light scuffing and surface marks on the hood, front-side panels, rear bumper, trunk area, rear quarter panel, and rear bumper. According to the VIN decode, this is a two-door Audi A3 Cabriolet with a 2.0-litre four-cylinder gasoline engine and automatic transmission. It was manufactured by Audi AG in Hungary and is equipped with front and side head/thorax airbags, among other standard safety systems. Two NHTSA recalls are listed for this vehicle’s model and year. Recall 21V198000 concerns a possible malfunction of the front passenger occupant-detection system, which may deactivate the passenger airbag when the seat is occupied. Recall 24V110000 concerns a fuel-tank suction-jet-pump seal that may allow fuel to enter the EVAP system and potentially leak from the charcoal canister, creating a fire risk. The available information does not confirm whether either recall has been completed. Because the vehicle has a missing wheel, exposed wheel-well and suspension components, major front-end damage, and multiple warning indicators, it should not be considered roadworthy without comprehensive inspection and repair. Structural alignment, suspension, steering, braking, airbag, electrical, engine, cooling, and fuel-system condition should be verified before purchase.