2023 AUDI A3 Premium

The vehicle is a 2023 Audi A3 sedan with a 2.0-liter turbocharged 40 TFSI four-cylinder gasoline engine, automatic transmission, and front-wheel drive. The VIN decodes to a vehicle manufactured by Audi AG in Germany. The auction lists the vehicle with a SALVAGE CERTIFICATE and identifies FRONT END as the primary damage. Stage 1 reports that the extensive visible front-end damage supports the FRONT END classification. The SALVAGE CERTIFICATE status cannot be confirmed from photos alone. The front end has extensive severe collision damage. The front bumper cover, lower fascia, and grille assembly are missing or detached, exposing the radiator and other internal components. Front support and radiator-area components show displaced edges and broken plastic sections. Both headlamp assemblies are missing from their mounting positions, and one detached headlamp is visible on the ground. The hood is heavily crushed and deformed, with multiple pronounced creases and distorted edges. The front-left fender and wheel-arch area are crushed and torn, with missing outer body material and exposed internal components. The windshield is extensively shattered, with spiderweb cracking and long radiating cracks across a large portion of the glass. The driver steering-wheel airbag and roof-side curtain airbags are deployed. The driver seat cushion upholstery is torn and has a damaged opening. Damage is also present at the rear. The left rear quarter panel is severely crushed and creased around the wheel arch and tail-lamp opening. The left rear tail lamp is broken and displaced, and the left rear bumper corner is torn and crushed with underlying parts exposed. The lower rear bumper cover has separated sections and an uneven lower edge. The trunk lid and surrounding edges show deformation and irregular gaps, particularly near the side corners. Overall, the vehicle has severe collision damage affecting the front structure and body panels, with additional substantial damage to the left rear area, windshield, lighting, restraint systems, and interior trim. A complete structural, mechanical, electrical, cooling-system, suspension, steering, and airbag-system inspection is required before determining repair feasibility or total repair cost. The condition of components not visible in the findings cannot be confirmed. Two NHTSA safety recalls are listed for this model and model year. Recall 22V901000 concerns missing weight-capacity information on the B-pillar safety certification label; the stated remedy is installation of an overlay label by an Audi dealer. Recall 24V251000 concerns a possible loose electrical connection in the front passenger-seat occupant-detection system, which could deactivate the front passenger airbag; the stated remedy is replacement of the occupant-detection system control module. Recall completion status for this vehicle should be verified by VIN with Audi or an authorized dealer.